Close
No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.
Myron L® Company has two proven ways to measure such impurities. Our DS Meters™ provide fast, accurate, on-the-spot measurements of total dissolved solids (TDS) or conductivity. pDS Meters™ test conductivity or TDS, plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications.
Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L® instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The user-replaceable pH electrode features a chemical-resistant, porous liquid junction.
Our unique, durable, field-tested design has evolved over more than 55 years, making Myron L® instruments among the most reliable and popular of their kind in the world. They’re lightweight and compact, yet Myron L®’s DS and pDS Meters are also tough, with rugged, taut-band meter movements. Put our meters to the test. Even after years of rough field service, they’ll surpass your expectations of accuracy, reliability and simplicity.
| Part Number | Description |
| 512M5 | DS Conductivity Meter: 0-5000 µM/µS |
| 512M10 | DS Conductivity Meter: 0-10,000 µM/µS |
| 512T4 | DS TDS Meter: 0-2500 ppm |
| 512T5 | DS TDS Meter: 0-5000 ppm |
| 512T5D | POOLMETER™ DS TDS Meter:
0-5000 ppm/442, 0-5000 ppm/NaCl |
| 512T10 | DS TDS Meter: 0-10,000 ppm |
| 532M1 | DS Conductivity Meter: 0-50, 500, 5000 µM/µS |
| 532T1 | DS TDS Meter: 0-50, 500, 5000 ppm |
| 532T2 | DS TDS Meter: 0-25, 250, 2500 ppm |
| AG-5 | AGRI-METER™ DS Conductivity Meter: 0-5 millimhos |
| D-1 | DIALYSATE METER™ DS Conductivity Meter:
11-15 millimhos |
| D-2 | DIALYSATE METER™ DS Conductivity Meter:
0-10 & 0-20 millimhos |
| EP-10 | DS Conductivity Meter: 0-10, 100, 1000, 10,000 µM/µS |
| EP | DS Conductivity/Resistivity Meter: 0-0.5, 5, 50, 500, 5000 µM/µS; 2-30 MΩ |
| RO-1 | RO METER™ DS TDS Meter: 0-1250 ppm (with color band) |
| RO-1NC | RO METER™ DS TDS Meter: 0-1250 ppm (no color band) |
| Part Number | Description |
| EP11/PH | pDS pH/Conductivity Meter: 0-10, 100, 1000,
10,000 µM/µS; 2-12 pH |
| T6/PH | pDS pH/TDS Meter: 0-5000 ppm; 2-12 pH |
| Ranges: Conductivity
pH |
1, 3, 4 or 5 depending on model, 2-12 pH (pDS Meters only)
(See meters table) |
| Readout: | 2½ in. taut-band shock resistant meter |
| Units of Measure* | Choice of parts per million (ppm) TDS or micromhos (µM)/microsiemens (µS) conductivity |
| Accuracy: Conductivity
pH |
±2% full scale
±0.2 pH units |
| Repeatability | ±1% |
| Temperature Compensation |
Automatic (to 25°C/77ºF) for conductivity samples between 10-71°C/50-160°F |
| Calibration
Controls |
Conductivity
pH Zero and pH Gain |
| Electrodes (built-in) | Conductivity: Never need replatinizing pH: KCl gel-filled, field replaceable |
| Cell Cup | Chip and crack resistant polyethylene |
| Circuitry | Very stable; requires minimal recalibration |
| Power | One 9 volt battery supplied;
Battery Life: >2000 tests/1 year |
| Dimensions | 3.4 W x 4.5 D x 4.0 H in./
86 W x 114 D x 102 H mm |
| Weight | 1 lb./0,45 kg |
*1 µM (micromho) = 1 µS (microsiemen)
| Model | 512T4* | 512M5* | 512T5* | 512T10* | 532M1* | 532T1* | 532T2* | EP-10 | EP |
| Range(s) | 0-2500 | 0-5000 | 0-5000 | 0-10,000 | 0-50
0-500 0-5000 |
0-50
0-500 0-5000 |
0-25
0-250 0-2500 |
0-10
0-100 0-1000 0-10000 |
0-0.5
0-5 0-50 0-500 0-5000 |
| Units Measured | ppm** | µM | ppm | ppm** | µM | ppm | ppm | µM | µM, MΩ |
| Recommended NIST Standard Solution Key |
F | G | G | O | B,D,G | B,D,G | A,C,F | K,M,O | B,D,G |
| Model | T6/PH* | T2/PH* | EP11/PH |
| Range(s) | 2-12 pH
0-5000 |
2-12 pH
0-50 0-500 0-5000 |
2-12 pH
0-10 0-100 0-1000 0-10000 |
| Units Measured | pH, ppm | pH, ppm | pH, µM |
| Recommended NIST Standard Solution Key |
G | B,D,G | K,M,O |
* These models feature the Internal Standard for easy field conductivity calibration and range doubling.
** Also available in micromhos.
Note: pH 7 Buffer is especially important and should be used every 1- 2 weeks.
A 442-15 (15 ppm/24 µS)
B 442-30 (30 ppm/47 µS)
C 442-150 (150 ppm/229 µS)
D 442-300 (300 ppm/445 µS)
E 442-1000 (1000 ppm/1417 µS)
F 442-1500 (1500 ppm/2060 µS)*
G 442-3000 (3000 ppm/3900 µS)*
H 442-15000 (15,000 ppm/16,630 µS)
I 442-30000 (30,000 ppm/30,100 µS)
J KCL-18 (11 ppm/18 µS)
K KCL-70 (45 ppm/70 µS)
L KCL-180 (116 ppm/180 µS)
M KCL-700 (478 ppm/700 µS)
N KCL-1800 (1294 ppm/1800 µS)*
O KCL-7000 (5687 ppm/7000 µS)*
P KCL-18000 (16,462 ppm/18,000 µS)
PH4 pH 4 (red)*
PH7 pH 7 (yellow)*
PH10 pH 10 (blue)*
SS pH Sensor Storage Solution*
Example: To order 1 qt. of pH 4, order # PH4Q.
*Values available in 2 oz. bottles
Founded in 1957, the Myron L® Company is one of the leading manufacturers of water quality management instruments in the world.
2450 Impala Drive
Carlsbad, CA 92010-7226
Tel.: 1-760-438-2021
Fax: 1-760-931-9189
info@myronl.com
These products can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.