ULTRAPEN™ PT4
Free Chlorine Equivalent (FCE ™) &
Temperature Pen

 
Going fast ... order today!
ULTRAPEN™ PT4 is Myron L® Company’s ground breaking, new Pocket Tester for measuring Free Chlorine Disinfecting Power, Free Chlorine Equivalent (FCE), as well as Temperature. It is waterproof and designed to be extremely accurate, fast, and simple to use in diverse water quality applications.
HIGH PERFORMANCE FEATURES
  • Accuracy of up to ±0.3 ppm FCE
  • Proprietary Sensor Design
  • Calibration with pH and ORP Standard Solutions
  • Automatic Temperature Compensation
  • Temperature Readout
  • Waterproof
  • Powerd by one N Type Battery (included)
  • APPLICATIONS
  • Agriculture
  • Hydroponics
  • Aquaculture
  • Pharmaceutical
  • Boilers and Cooling Towers
  • Horticulture
  • Wastewater
  • Food and Beverage
  • Irrigation
  • Reverse Osmosis
  • Plus Many More!
  • NEW! FCE Free Available Chlorine (FAC) Function

    The Myron L® Company FCE function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L® Company FCE function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

    SPECIFICATIONS
    FCE Temperature
    Range: 0 - 10.0 ppm 0 - 71°C / 32 - 160°F
    Accuracy: < 5.00 ppm ± 0.3 ppm
    ≥ 5.00 ppm ± 0.5 ppm
    ± 0.1ºC / ± 0.1ºF
    Resolution: 0.01 ppm 0.1ºC / 0.1ºF
    Time to Reading Stabilization: 10 - 45 seconds
    Power Consumption: Active Mode 37 mA, Sleep Mode 2 µA
    Temperature Compensation: Automatic In Calibration Mode From 15ºC to 30ºC
    Physical Dimensions: 17.15 cm L x 1.59 cm D / 6.75 in. L x .625 in. D
    Weight: 50.4 g / 1.78 oz. (without soaker cap and lanyard)
    Case Material: Anodized Aircraft Aluminum with Protective Coating
    Battery Type: N type, Alkaline, 1.5 V
    Calibration Standard Solutions: pH4, pH7, pH10, ORP80, ORP260, ORP470
    Operating/Storage Temperature: 0 - 55ºC / 32 - 131ºF
    Enclosure Ratings: IP67 and NEMA6

    EN61236-1: 2006 – Annex A: 2008: Electrostatic discharge to the PT4 may cause it to
    spontaneously turn on. If this occurs, the PT4 will turn off.

    ACCESSORIES

    Standard Solutions for calibration:
    The ULTRAPEN™ PT4 requires pH4, pH7, and pH10 pH Buffer Solutions and
    80 mV Quinhydrone, 260 mV Quinhydrone, or 470 mV MLC Light's ORP Standard Solutions
    for wet calibration, and Sensor Storage Solution for proper storage.
    Order Model Numbers: PH4, PH7, PH10, ORP80, ORP260,
    ORP470, ORPCALKIT, PHSS.

    Replacement FCE Sensor:
    The ULTRAPEN™ PT4 features a user replaceable FCE sensor. Installation instructions included with sensor.
    Order model#: RPT4

    ORP Electrode Cleaning Paper:
    Routinely cleaning the platinum electrode will keep the sensor free of build-up that can affect the speed and accuracy of FCE readings. Instructions for use are included with the paper.
    Order model#s: OECP-25 for QTY 25 or OECP-100 for QTY 100
     

    WARRANTY

    The PT4, excluding the FCE sensor, has a one (1) year limited warranty.
    The FCE sensor has a six (6) month limited warranty.

                          Page last updated on :21-Oct-2013 

    Literature or RMA Request | Warranty| Site Map | Feedback

    © 1999-2012  Myron L® Company.  All rights reserved.
    Copyright, Disclaimer, Privacy Policy and Terms of Use