These products can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP),
which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

CONTROLSTIK II SYSTEM Dual Range Heavy Duty Rinse Tank Control System
Click here for detailed image

Model 597

Cuts Water Consumption up to 85%



  • IP65/NEMA 4X Rating Water and Corrosion Resistant Enclosure

  • 316 Stainless Steel Hardware

  • Reliable Solid-State Electronics

  • Automatic Temperature Compensation to 25C/77F up to 82C/180F

  • Valve features Anti-Hammer Closing, Adjustable Flow Control, and Manual Override


The Myron L CONTROLSTIK II Rinse Tank System dramatically reduces the amount of water used in continuous flow rinse tanks. At the same time, it automatically maintains optimum water purity, ensuring effective rinsing.



The three parts of the CONTROLSTIK II System are easily installed. The CONTROLSTIK II (conductivity sensor) is set at a tolerable contamination level and submerged in the tank. Water cannot flow into the tank until drag-in from rinsed parts causes the contamination level in the tank to rise above the pre-set point. The CONTROLSTIK II (sensor) then signals the solenoid valve to open, adding fresh water. As soon as this fresh water dilutes the contamination to the tolerable pre-set level, the CONTROLSTIK II (sensor) closes the valve.




  • Continuous-flow rinse tanks

  • Circuit board manufacturing

  • Electroplating

  • Wastewater

  • Plus many more!






Rinse water usage shall be minimized by means of automatic conductivity control systems. They shall consist of a temperature compensated conductivity sensor, corrosion resistant one-inch solenoid valve, and transformer box which safely reduces line power to the sensor. Enclosure shall be fiberglass with heavy rubber gasket and 316 stainless steel. Circuitry shall be solid-state, and unaffected by changes in voltage. Setpoint adjustment shall be on sensor to minimize tampering. Rinse tank controls shall be MyronL Model 597 or approved equal.

Additional Information
(includes specs, options & order info)

click here: PDF

Price List

click here: PDF

Operation Manual

click here: PDF


Limited Warranty
II Systems have a Two (2) Year Limited Warranty. If this system fails to function normally, return the faulty unit or the system to the factory prepaid. If, in the opinion of the factory, failure was due to materials or workmanship, repair or replacement will be made without charge. A reasonable service charge will be made for diagnosis or repairs due to normal wear, abuse or tampering. Warranty is limited to the repair or replacement of the units of the CONTROLSTIK II System only. The Myron L Company assumes no other responsibility or liability.


                      Site last updated on: 30-Apr-2008 

Literature or RMA Request | Warranty | Site Map | Feedback

© 1999-2013  Myron L Company.  All rights reserved.
Copyright, Disclaimer, Privacy Policy and Terms of Use